ACP Technologies|sublimation| dye, printer, blanks| Unisub Vapor Premiere Powered by JRank
Dedicated to all your Digital Decorating needs
Contact Us   |   View Cart
 

Heat Pressing Info

 

Decorative Ceramic Ornaments

 

One Sided Ornament

1) Preheat press to 400° and set to medium pressure

2) Place a plain piece of clean paper on the heat press table (optional)
3) Place the ornament face up on the paper
4) Place the transfer on face down on the ornament
5) Place a plain piece of clean paper on top of transfer (optional)
6) Place heat conductive rubber on top
7) Heat for  5 ˝ - 6 minutes (XG8 inks - 4 minutes) adjusting time as necessary for best results
 

 


 
 

Two Sided Ornament

1) Preheat press to 400° and set to medium pressure
2) Print transfer with front and back image side-by-side

3) Place a plain piece of clean paper on the heat press table

4) Fold paper around ornament and place on press
5) Place a plain piece of clean paper on top of transfer (optional)
6) Place heat conductive rubber on top
7) Heat for 4˝ - 5 minutes (XG8 inks - 4 minutes) on first side
8) Immediately flip ornament and continue heating for an additional 4˝ -5 minutes (XG8 inks - 4 minutes) on second side adjusting time as necessary for best results
 
 

 
The information contained herein is included for illustrative purposes only and, to the best of our knowledge, is accurate and reliable.  ACP Technologies cannot, however, under any circumstances make any guarantee of results or assume any obligation or liability in connection with the use of this information.  As ACP has no control over the use to which others may put its products, it is recommended that the products be tested to determine if suitable for a specific application and/or information is valid in a particular circumstance.  Responsibility remains with owner for the design, application and proper installation of each product.  Specifier and user shall determine suitability of products for a specific application and assume all responsibility in connection therewith.


  Customer Service: 1-800-741-2551
 
Mon–Fri 9am-5pm EST
 
425 Cross St. - Ste 213, Punta Gorda, FL  33950
Sign up for our newsletter
 
Sublimation Solutions® is a registered trademark.
 
©2011 ACP Technologies. All rights reserved.