panels are comprised of a maple veneer with a low gloss ChromaLuxe
coating and have pre-drilled keyholes on the
back so that they are ready to hang out of the box. Sublimating
Instructions: When sublimating Natural Wood
Panels it is important to minimize the bleed on your transfer in
order to reduce the appearance of dyes on the sides.
Suggested bleed is 0.1” on all four sides with the transfer taped to
the back of the panel. Press time and temperature
is the same as it is for our standard MDF wood panels (400º F for
1:30-2:30 depending on size).